Bannergear Wall System
Close Filter
Filter & Sort
Bannergear™ Wall System
The patented bannergear™ Wall System makes installing your indoor or outdoor banner easier than ever. Banners can be changed within minutes by a single individual, and if the bottom of the frame is within 4 feet of the ground, they can even be changed from ground level without using ladders or lifting equipment. This major innovation frees up labor, time and the expense and hassle of using or renting expensive equipment every time you change your banner.
The key to the bannergear™ banner display is the wire cable system that runs along the inside of the banner frame. Your banner is attached to the wire cable using carabiner hooks. The banner is then lifted and stretched into place inside the frame using a crank that is attached to an access hole near the bottom of the frame. Then the crank is removed from the frame and the access hole is covered with the included cap screw.
To change your banner, lower the banner using the crank, unhook the banner, attach the new one, and crank the new banner into place. With the patented crank and cable system, one worker can lower the banner to the bottom of the frame, change out the banner, and then turn the crank to lift it back into place, all within a matter of minutes.
The bannergear™ frame is made from silver anodized aluminum and heavy duty galvanized steel that resists rust and fading and can be secured to the wall with the included hardware. Check out our bannergear™ video to see just how easy changing your banner can be!